5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) has been widely used in factories due to its high packaging efficiency and convenient operation. Today, Fengyuan editor, 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) operation instructions are as follows, hoping to be beneficial to the majority of manufacturers.
First, 5540 semi-automatic body-fitting machine (5540 body-packing machine) operation panel and adjustment parts
1. If the operation panel button is connected to the chart, the general production process is automatic operation, manual part, troubleshooting or mechanical adjustment.
Instructions: 1. Power indicator, 2. Electric heating indicator, 3. Pressure frame rising, 4. Open (start)
5 manual-automatic selection 6 vacuum time 7 heating time 8 power switch
_Electric heating switch pressure box lowered 11 emergency stop 12 manual vacuum
2. This series of vacuum fastening (tight) packaging machines can use various materials and thick adhesive films. During the operation, the limit switch and the delay timer can be adjusted together:
1) Breathe early. 2) Intake timing. 3) Rack up adjustment
The above limit switches and timers are shown in the drawing.
Second, 55540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) instructions for use
(1) Work flow of the machine
1. The lifting pressure frame is in the original position (lower limit).
2. Manually raise the frame.
3. Apply a good film.
4. Start up to the upper limit.
5. Hot box pull-in limit, heating timing.
6 , timing to action, while vacuum.
7. Decrease to the lower limit and vacuum time.
8. Time is up.
9. Manually raise the frame and pull out the aluminum plate.
10. Cut off.
11. Start for the second time.
Operation video of 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine):
(2) Packaging steps of the machine
1. Place the film on the film holder, pull out a certain length of film, open the pressure frame, so that it can penetrate through the two rollers and the pressure frame behind the frame, then turn on the power and power, and select automatic press Button, press the box to go up.
2. Pull out the working aluminum plate and place the substrate (cardboard and foam tape) on the working aluminum plate. The package is then placed on the substrate and pushed into the vacuum chamber.
3. Before pulling the heating box, soften the film.
4. When the set temperature is reached, the pressure frame automatically lowers and vacuum starts.
5. Push away the hot box.
6. After the vacuum is completed, open the pressure frame, pull out the working aluminum plate, and lower the upper pressure frame.
7. Cut the film with a small knife, and then remove the packaging.
8. That completes a workflow.
9. Repeat 1 to 7 for the second task.
5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) Picture: 
5540 semi-automatic body packaging machine (5540 body packaging machine) radiator body packaging example: 
5540 semi-automatic body packaging machine (5540 body packaging machine) ferrite core body packaging example: 
5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine)
5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine)
For further information on the operating instructions of the 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) , please contact the senior sales consultant of Fengyuan Packaging: Manager Tang, Tel: 13509839987, Enterprise Business QQ: 2850670788.
Dongguan Zhongtang Fengyuan Packaging Product Factory (beginning in 1997, drafting unit for body packaging of the "Guide to the Selection of Packaging Machinery" by Machinery Industry Press)
Chongkou Industrial Zone, Shentang, Jiaoli, Zhongtang Town, Dongguan City, Guangdong Province
National free consultation hotline: 400-889-6006
Phone: 0769-88128321, 88128391 Fax: 0769-88128381
Fengyuan Skin Packaging Film Website: www.skinpack-cn.com
Fengyuan Skin Packaging Machine Website: www.tietibaozhuang.com.cn
