Known skin packaging process knows, packaging film trimming Skin ( packaging film attached to the side ) is one of the very important process. Our skin-packing sales staff often encounter customers ' questions about trimming this skin-fitting paper card . Today, the network information department of Dongguan Fengyuan Skin Packaging Products Factory, with more than 10 years of skin vacuum packaging experience, will make a comprehensive and comprehensive interpretation for everyone: how to trim the skin packaging film perfectly to help you achieve perfect and delicate Vacuum skin packaging effect.

The method of trimming the skin-packing film is very simple. There are only two ways.

The first way to trim the skin-packing film is to trim it by hand. After printing, the paper card is cut into small single cards. Then put it into the vacuum skin packaging machine with the product, and carry out the skin vacuum packaging process, so that the skin packaging film and all cardboard are bonded together. Then put it on the glass, and then use a sharp art blade to make a light stroke along the edge of the paper card, and the excess skin-packaging film is cut.

The second method for trimming the skin-packaging film is automatic trimming. After a whole cardboard skin-packaging package is laminated, it is placed on an automatic roller cutting machine . Using a die, the entire skin-packed cardboard is wrapped. It takes about 8 seconds to cut a single card into a skin-packed finished product, which is very efficient and saves labor and labor.

More on how to skin packaging to side (trimming) method, you learn it? I hope that the method of trimming the skinny cardboard summarized by Fengyuan Packaging Information Department will be of practical help to your skinny packaging production. If you find this article useful to you, please pay more attention to the publication of our technical articles.

Original articles, plagiarism must be legally responsible.