Fengyuan PV-70120FA Continuous Full-automatic Skin-fitting Blister Packaging Machine (Vacuum Blister-fitting Machine)
Fully automatic feeding and cutting, automatic cutting, saving manpower, efficiency of skin packaging
The main components of PV-70120FA continuous automatic skin packaging machine (vacuum skin packaging machine):
A: Board placement area, bull's eye wheel table, used to place products and as a worktable
B: instantaneous heating host, effective working area: 1200X700MM, large output
C: Pulling / discharging manipulator: Powered discharging drum frame and manipulator discharging device. The manipulator first pulls out the packaged product and breaks the film, and then it is transported by the power roller to the bull's eye wheel working platform
D: Finished product division area: bull's eye wheel worktable, which cuts the packaged finished product or transitions the packaged finished product to a spare storage table.
PV-70120FA continuous automatic skin-packing packaging machine (vacuum skin-packing machine) instantaneous heating type host (schematic B):
1. According to the original Taiwan packaging machine standard, the main and auxiliary machines are all welded with carbon steel structure. The material is GB 5 angle steel, which is durable and never deformed.
2. The main machine auxiliary machine cover sheet metal is formed by hot plate bending, and the surface is acid-washed and vulcanized, then powder-coated and hot-baked. The surface coating will never fall off, and it is not easy to hang flowers.
3. The host uses a 70-type worm gear reducer to drive the motor. The motor configuration is 380V / 750W. The equipment runs accurately, and the membrane frame moves smoothly without vibration.
4, PE film vacuum forming is completed by 2 2200W high pressure fans, the maximum flow rate: 650 (m3 / h), the maximum suction: -150 (mBar), short vacuum time (3-5 seconds / times), fast vacuum forming speed , Strong adhesion.
5. The hot film cutter is thermostatically controlled. The cutting blade is made of brass and heated by a 250W heating plate, which is durable.
Instead of the Taiwan model, the film is cut by the instantaneous heating of the heating wire to avoid frequent replacement of the heating wire.
6. The sandwich frame is welded and ground by flat steel, and the surface is chrome-plated. The frame is equipped with a heat-insulating adhesive film device, which changes the traditional model. After a long period of use, the high temperature of the sandwich frame causes the adhesive film to melt and affect the vacuuming effect.
PV-70120FA continuous automatic skin-packing packaging machine (vacuum skin-packing machine) host hot box part:
7. The external heat box of the main machine is made by bending and welding 3MM carbon steel plate. The material of the internal heat box is 1.5MM 201 stainless steel body, which is reinforced internally and will not deform for a long time at high temperature
8. The host adopts carbon fiber heating tube. Carbon fiber heating tube is a high-tech product that is different from traditional heating tubes such as metal wire and halogen. During work, the heating element is free from oxidation and breakdown, and the heating light color is uniform. Electric heating conversion efficiency is high (more than 95%), far-infrared radiation (wavelength is close to the absorption wavelength of the human body), health and environmental protection. Product basic environmental test procedures);
9, custom-built 70,120 models of heating tubes total 45, the instantaneous power is about 47KW. Arranged in a special order to ensure fast heating and uniform heating of the entire film
10. The film heating is controlled by infrared electric eye. The electric eye detects the heating position of the film. It can preheat the accumulated temperature according to the heat box, reduce the heating time, save energy and improve efficiency.
11. The heat dissipation mechanism is installed on the inner heat box and the outer heat box to prevent the accumulation of residual heat and affect the packaging effect.
Powered discharging drum frame and mechanical hand discharging device, the mechanical hand first pulls out the packaged finished product, and then it is transported by the power roller to the bull's eye wheel working platform (schematic diagram C)
1. The unloading (drawing) manipulator is controlled by a 70-speed reducer combined with a five-point chain mechanical transmission, which is controlled by a photoelectric sensor. The conveying is stable and the positioning is accurate. The speed is adjustable in three stages and the motor power is 750W.
2. The discharge hook is formed by 12MM iron plate laser cutting at one time, and the surface is chrome-plated.
3. The diameter of the discharging power roller is 60MM, the tube surface is made of galvanized thick steel pipe, the speed is controlled, and the motor power is 380V / 200W
PV-70120FA continuous automatic skin-packing packaging machine (blister-fitting machine) finished product division (schematic D)
1. The platform of the finished product division is a steel structure with a universal bull's eye wheel and universal drive, saving time and effort.
2. The working tray is a 5MM thick aluminum plate with a size of 1220 * 705MM, 2 pieces, and the operation is cyclic, which improves the output, saves time and labor, and reduces labor.
3. All the auxiliary machine cover plates are all vulcanized and dusted, and the appearance of the equipment is natural.
PV-70120FA continuous automatic skin-packing packaging machine (vacuum skin-packing machine) equipment electrical control part:
1. PLC control of the whole machine, external touch screen (located in the upper left corner of the board placement area), the operation is simple, convenient and clear.
2. The electrical control connection between the main machine and the auxiliary machine is a dedicated fast aviation socket, which is convenient and reliable.
3. The power supply of the whole machine is three-phase / 380V, no external air source is required.