--> 5540 semi-automatic body-fitting machine (5540 body-packing machine) operation instructions-Fengyuan Packaging_Skin Packaging Film_Surlyn Film

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

5540 semi-automatic body-fitting machine (5540 body-packing machine) operation instructions


      5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) has been widely used in factories due to its high packaging efficiency and convenient operation. Today, Fengyuan editor, 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) operation instructions are as follows, hoping to be beneficial to the majority of manufacturers.
 
 
    First, 5540 semi-automatic body-fitting machine (5540 body-packing machine) operation panel and adjustment parts
    1. If the operation panel button is connected to the chart, the general production process is automatic operation, manual part, troubleshooting or mechanical adjustment.
 
    Instructions: 1. Power indicator, 2. Electric heating indicator, 3. Pressure frame rising, 4. Open (start)
     5 manual-automatic selection 6 vacuum time 7 heating time 8 power switch
     _Electric heating switch pressure box lowered 11 emergency stop 12 manual vacuum
 
     2. This series of vacuum fastening (tight) packaging machines can use various materials and thick adhesive films. During the operation, the limit switch and the delay timer can be adjusted together:
    1) Breathe early. 2) Intake timing. 3) Rack up adjustment
 
     The above limit switches and timers are shown in the drawing.
  Second, 55540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) instructions for use
  (1) Work flow of the machine
 
    1. The lifting pressure frame is in the original position (lower limit).
  2. Manually raise the frame.
  3. Apply a good film.
  4. Start up to the upper limit.
  5. Hot box pull-in limit, heating timing.
    6 , timing to action, while vacuum.
  7. Decrease to the lower limit and vacuum time.
  8. Time is up.
  9. Manually raise the frame and pull out the aluminum plate.
  10. Cut off.
  11. Start for the second time.
  
    Operation video of 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine):
    
 
   (2) Packaging steps of the machine
     1. Place the film on the film holder, pull out a certain length of film, open the pressure frame, so that it can penetrate through the two rollers and the pressure frame behind the frame, then turn on the power and power, and select automatic press Button, press the box to go up.
 
     2. Pull out the working aluminum plate and place the substrate (cardboard and foam tape) on the working aluminum plate. The package is then placed on the substrate and pushed into the vacuum chamber.
 
     3. Before pulling the heating box, soften the film.
 
    4. When the set temperature is reached, the pressure frame automatically lowers and vacuum starts.
  
    5. Push away the hot box.
 
    6. After the vacuum is completed, open the pressure frame, pull out the working aluminum plate, and lower the upper pressure frame.
 
    7. Cut the film with a small knife, and then remove the packaging.
  
    8. That completes a workflow.
 
    9. Repeat 1 to 7 for the second task.
 
   5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) Picture:  5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) Picture:
     
    
   
 
   5540 semi-automatic body packaging machine (5540 body packaging machine) radiator body packaging example: 5540 semi-automatic body packaging machine (5540 body packaging machine) radiator body packaging example:
   
 
   5540 semi-automatic body packaging machine (5540 body packaging machine) ferrite core body packaging example: 5540 semi-automatic body packaging machine (5540 body packaging machine) ferrite core body packaging example:
     
   
 
   5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine)
 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine)
     
 
   5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine)
 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine)
    
   
   For further information on the operating instructions of the 5540 semi-automatic body-fitting machine (5540 body-fitting packaging machine) ,     please contact the senior sales consultant of Fengyuan Packaging: Manager Tang, Tel: 13509839987, Enterprise Business QQ: 2850670788.
 
   Dongguan Zhongtang Fengyuan Packaging Product Factory (beginning in 1997, drafting unit for body packaging of the "Guide to the Selection of Packaging Machinery" by Machinery Industry Press)
 
   
   Chongkou Industrial Zone, Shentang, Jiaoli, Zhongtang Town, Dongguan City, Guangdong Province
   National free consultation hotline: 400-889-6006
   Phone: 0769-88128321, 88128391 Fax: 0769-88128381
   Fengyuan Skin Packaging Film Website: www.skinpack-cn.com
   Fengyuan Skin Packaging Machine Website: www.tietibaozhuang.com.cn
  

Technical Support


The main types of sarin film (DuPont sand shower body film) and how to choose it?

The main types of sarin film (DuPont sand shower body film) and how to choose it?


Commercial value of sand leaching film (dupont sarin film) in hardware packaging

What are the commercial values ​​of sand shower film advantages (advantages of Dupont sarin film) in skin packaging for hardware products ?


Shalin film (dupont sarin body film, sand shower film) suitable for packaging high-end hardware products

Is sarin film (dupont sarin body film, sand shower film) suitable for packaging high-end hardware products?


Well-known sarin film manufacturer-Guangdong Fengyuan Skin Packaging Factory  

Dongguan Zhongtang Fengyuan Packaging Products Factory is a well-known domestic manufacturer of sarin film .


What is the process principle of SE body packaging film (SE body film)?

Skin-packing process: The transparent skin-packaging film is properly heated and softened and then covered on the product and the bottom plate. At the same time, vacuum suction is enabled under the bottom plate of the close-pack packaging machine. The body-fitting film is adhered to the bottom plate (color printing paper card, corrugated cardboard or foam cloth, etc.)


What is the process principle of SE body packaging film (SE body film)?

After the transparent skin packaging film is properly heated and softened, it is covered on the product and the bottom plate, and the vacuum suction is enabled under the chassis. The body-fitting film is formed and stuck on the chassis (color printing paper card, tile edge board or bubble cloth, etc.).


What is the process principle of PET skin packaging film (PET skin film)?

What is the process principle of PET skin packaging film (PET skin film)? PET skin-packing film (PET skin-packing film) is a plastic film used for skin-packaging made of PET plastic material extruded into a film and then coated with hot melt glue.


What is the process flow of PE skin packaging film (PE skin film)?

What is the process flow of PE skin packaging film (PE skin film)? The transparent PE body packaging film (PE body film) is properly heated and softened, and then covered on the product and the bottom plate.


What is the principle of the PVC body packaging film (PVC body film)?

What is the principle of the PVC body packaging film (PVC body film)? The transparent PVC body packaging film (PVC body film) is appropriately heated and softened, and then covered on the product and the bottom plate.


Vacuum body-fitting film (vacuum body-packing film) has many advantages to ensure the perfect fit of circuit board magnetic core hardware products

Vacuum body-fitting film ( vacuum body-packing film ) has many advantages to ensure the perfect body-fitting of circuit board magnetic core hardware products: good toughness, resistance to handling and low temperature Good transparency, fresh and bright after packaging.


What are the main features and advantages of vacuum body film (vacuum body film)?

What are the main features and advantages of vacuum body film (vacuum body film)?


What are the main uses of PET body film (PET body packaging film)?

What are the main uses of PET skin pack film ( PET skin pack film )? Hardware products (furniture hardware, decorative hardware, etc.), auto / motorcycle accessories (such as brake pads, gears), measuring tools (drills, saw blades, etc.), stationery, toys, sports equipment / furniture accessories, pneumatic / hydraulic accessories, crafts, Ceramic / Glass products.